PCI Express Gen 1 Test Backplane
PCI Express Gen 1 Test Backplane
Overview:
- Easy Plug-and-Play installation
- Connects to the host computer via standard CAT6 cable and PCI Express host board
- Compliant with PCI Express 1.1 specification
- Four PCI Express slots (one x4 and three x1 slots)
- Supports hot-swap operation
- Per-slot power monitoring, and over-current protection
- Per-slot access to the PCI bus JTAG Boundary Scan signals to support board level testing/programming
- Supports Amfeltec In-Ciruit Programmer/Loader (eLoader™)
- Powered by standard ATX power supply
- Mounting holes based on ATX Specification 2.0
- Mechanical stabilization for add-in PCI Express boards to facilitate bracket-less mount (US Patent 7,255,570)
- RoHS compliant
PCI Express Gen 1 Test Backplane
PCI Express Gen 1 Test Backplane (top view)
PCI Express Gen 1 Test Backplane
UUT with support tabs
PCI Express Host board
The PCI Express Test Backplane was designed to support production testing/debugging of PCIe-based peripheral boards. The backplane expands the x1 PCI Express interface of the host computer into one x4 and three x1 PCI Express slots via 7 ft CAT6 cable.
The PCI Express backplane is a versatile platform that allows you to test up to 4 PCI Express boards at the same time, facilitates easy access to logic signals, provides hot-swap compatibility, and per-slot overcurrent protection.
The backplane provides access to the PCIe-bus JTAG signals, thus acting as a universal device for programming/loading of FPGA/CPLD (during production and testing).
Specifications:
- One x4 and three x1 PCI Express slots
- Connects to the Host computer via 7 ft. CAT6 cable and x1 PCI Express Host card
- Compliant with PCI Express bus specification 4.0
- Supports hot-swap operation
- Per-slot power monitoring, and over-current protection
- Per-slot access to the PCI bus JTAG Boundary Scan signals to support board level testing/programming
- Supports Amfeltec’s In-Circuit Programmer/Loader (eLoader™)
- Powered by standard ATX Power Supply
- Mounting holes based on ATX Specification 2.0
- Operation temperature: 0°C to +75°C
- Dimensions (W x D): 200mm x 195mm
- RoHS compliant
Standard Package Includes:
- PCI Express Test Backplane
- x1 PCI Express Host board
- 7 ft. CAT6 cable
- 7 ft. control flat cable
- Power load for ATX psu
- Hot-swap software under Windows® and Linux OS
Part Number:
- SKU-015-01 PCI Express Gen 1 Test Backplane
All AMFELTEC PRODUCTS ARE DEVELOPED & PRODUCED IN CANADA
FEATURED PRODUCTS
In-Circuit Programmer/Loader (eLoader™)
PCI Express Active Cable Extender
PCI Express Gen 3 Test Backplane
